DMS 5 Axis CNC Router E740 [SOLD]

SOLD: Used 5-axis DMS CNC router, 5×12 table, 6th axis lathe, 48 in stroke, 11 hp HSD spindle, 12-tool ATC carousel, Fagor 8055 Plus CNC.

2008 DMS 5-axis CNC router is equipped with a stationary 5 ft x 12 ft aluminum table, 6th axis lathe, 72 inches of Z clearance, 48 inches of Z axis stroke, 11 hp HSD A.T.C. spindle, and a 12-tool automatic tool change carousel. CNC router machinery is controlled by Fagor Automation 8055 Plus CNC system. View detailed CNC router machinery specifications below. THIS CNC ROUTER IS NO LONGER AVAILABLE.

Used 5 Axis CNC Router Specifications

  • DMS 5-axis CNC router model No.: 5B5-5-18-48-SCOLXX
  • Originally manufactured in 2008
  • 5′ x 12′ stationary aluminum router table
    • 3/8″ threaded inserts on 12″ centers
  • Heavy duty lathe 6th axis, removable
  • 72″ vertical bridge clearance
  • 48″ Z axis stroke
  • 11 hp HSD ATC spindle motor – ISO 30, 20,000 Max RPM
  • 12 position tool change carousel
  • Fagor 8055 Plus CNC system controller
    • Ethernet
    • Tool radius compensation
    • Tool center point compensation
    • Turbo card
    • Telediagnosis
  • Auto lube system
  • Auto tool height sensor
  • 230 V / 3 phase electrical requirements
  • 60 Amps / 60 Hz
  • 90PSI, 5CFM air requirement
  • CNC Machine is 18 ft. long
  • Z axis utilizes 32mm servo driven lead screw mounted with angular bearings
  • 35mm profiled ways on all linear axis
  • B Axis uses cycloidal 210:1 gearhead
  • C Axis uses cycloidal 109:1 gearhead
  • Speeds:
    • X-Axis – 1200 in./min.
    • Y Axis – 1200 in./min.
    • Z Axis – 600 in./min.
    • C Axis – 125 degrees/second
    • B Axis – 125 degrees/second

Similar Posts