DMS 3 Axis CNC Router	DMS 10 x 10 x 48 Gantry CNC Router
Freedom Machine Tool - Patriot 4x4 CNC Router	Freedom Machine Tool - Patriot 4x8 CNC Router

CNC Parts Dept. can answer the questions you have regarding the purchase of CNC routers for your facility. We will locate, install, upgrade, commission, laser align, and supervise rigging of your next CNC router to maximize your company investment. CNC Services Inc. will also train the machine operators at your factory on the safe and proper use of your CNC router.

• DMS 5 Axis CNC Routers feature heavy-duty thick walled tube frame construction, providing a rigid structure to dampen vibration and assures long-term accuracy and repeatability. Each ball screw and rail mounting surface is precision machined.
• Strength and precision are built into the rotary axes of the DMS 5 Axis CNC Router with high accuracy direct drive gear sets further reducing vibration and ensuring consistent alignment, increased tool life, and cut quality.
• Rotating ball-nuts are used on the X and Y-axes eliminating lead screw whip, providing increased stability, accuracy and machining feedrates. All ball screws are covered to protect them from being contaminated with chips and other debris.
• The DMS 5 Axis CNC Router control system utilizes the Fagor 8055C and brushless AC servo motors to deliver fast, consistent, and dependable multiple axis control in a state of the art CNC package. There is also a network and hard drive adapter available to allow the CNC to connect to your network.
• High quality Star brand ways and ball screws are used on all linear axes of the DMS 5 Axis CNC Router. Star brand products are built to the highest quality standards, further ensuring your machines long-term reliability and performance.

^*These fields are required.

“When quality and precision matter…DMS delivers!”

~Diversified Machine Systems, Inc.

• The DMS line of 3 Axis CNC Routers starts with over three decades of machine tool engineering, structural fabrication, manufacturing and CNC control systems design experience.
• Complete in house steel fabrication and machine assembly capabilities plus a Quality Assurance program that pays close attention to every detail assures that each machine is the most robust, precise and highest performance CNC Router available in this class of machine tool.
• The entire DMS CNC Router Product Line features heavy wall steel tube and structural plate weldment construction that provides an extremely rigid machine tool platform. All structural members are stress relieved with Surface Ground major assembly contact points and precision machined structural component mounting surfaces.
• This rigid structure combined with top of the line spindles and tools, a high performance Fagor CNC Controller, precision machine tool positioning components and full Digital AC Servo drive systems produces a CNC Router with tool path stability, speed and accuracy unsurpassed in any machine of this class or affordability.

^*These fields are required.

“When quality and precision matter…DMS delivers!”

~Diversified Machine Systems, Inc.

Base Machine Configuration:

• 3-Axis, moving gantry design with a 4′ x 8′ work area.
• Welded steel tube, angle and plate frameworks, precision machined, drilled and tapped for a 4′ x 8′ table.
• Z-Axis tool plate with a 7”, servo driven, vertical stroke.
• FAGOR 8035 Industrial CNC control with color CRT, 256K memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.
• 25mm precision, profiled rails with recirculating bearing blocks on all axes.
• Precision ball-screws with anti-backlash ball-nuts on all axes (25mm on X & Y, 20mm on Z).
• Industrial quality brush-less AC servo motors and matching servo amplifiers on all axes.
• BobCad V 23 Cad/Cam software and post processor.
• 220v, 3-phase, 60 hz power. 30 amps required.

Precision Ball Screws with Anti-backlash Ball Nuts

FAGOR digital AC servo motor and amplifier

FAGOR 8035 Industrial CNC control

Spindle Options:

HSD 11HP Spindle

• 5 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 9 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 5 HP HSD 915, continuous duty,push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM. Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• 11 HP HSD 919, continuous duty, push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM. Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• All spindle options are electric fan cooled for quiet operation.

Table Options:

• 4′ x 8′ Phenolic table top machined flat
• 4′ x 8′ Phenolic table top machined flat with 3/8″ steel helicoil inserts on 12″ centers
• 4′ x 8′ aluminum T-slot table
• 4′ x 8′, 2-Zone, phenolic vacuum plenum with manual controls
• 4′ x 8′, 4-Zone, phenolic vacuum plenum with manual controls

Optional Accessories:

• 6-Position tool rack for fully automatic tool change capabilities.
• Automatic tool height sensor. Uses the 6th position on the tool rack. The fully automatic tool change machine becomes 5-position.
• Dust hood for point-of-generation chip collection. 4” port requires a 1,200 cfm dust collector hook-up. Dust collector not included.
• Hand-held teach pendant on umbilical cord with axis select and jog hand-wheel.
• Ethernet card with standard TCP/IP protocol for easy connection to your network.
• M04 counter clockwise spindle rotation for use with left handed tools and to overcome blow-out problems when machining hard-woods.
• Unist “Uni-Max” coolant system with M-code programmable on/off control, and single or multiple nozzles for cutting non-ferrous metals requiring lubrication. Dust hood must be removed while using this system.
• 1” bridge spacers installed to increase bridge clearance to 9”.
• 2” bridge spacers installed to increase bridge clearance to 10”.
• 3” bridge spacers installed to increase bridge clearance to 11”.

Vacuum Pumps:

• Travaini EVO-5, 5 HP, 70 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 20 amps required. Great for sealed fixture applications.
• Travaini EVO-10, 10 HP, 145 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 30 amps required. Great for sealed fixture and porous-plenum applications.

Contact CNC Parts Dept at 858.922.4967 for more information on The Patriot.

Spindle Motors	DC Servo Motors	VFD's	CNC Controllers	Servo Cards

We sell CNC Router Spindles, VFD AC Drives, Servo Motors, Servo Cards & Encoders, Controllers, Monitors, Handwheels, Tool Clips, Collets, & Tool Holders, Linear Guides & Ball Nuts. Contact us with your specific need if you can’t find what you are looking for on this site.

Base Machine Configuration:

• 3-Axis, moving gantry design with a 4′ x 4′ work area.
• Welded steel tube, angle and plate frameworks, precision machined, drilled and tapped for  a 4′ x 4′ table.
• Z-Axis tool plate with a 7”, servo driven, vertical stroke.
• FAGOR 8035 Industrial CNC control with color CRT, 256K memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.
• 25mm precision, profiled rails with recirculating bearing blocks on all axes.
• Precision ball-screws with anti-backlash ball-nuts on all axes (25mm on X & Y, 20mm on Z).
• Industrial quality brush-less AC servo motors and matching servo amplifiers on all axes.
• BobCad V 23 Cad/Cam software and post processor.
• 220v, 3-phase, 60 hz power. 30 amps required.

Precision Ball Screws with Anti-backlash Ball Nuts

FAGOR digital AC servo motor and amplifier

FAGOR 8035 Industrial CNC control

Spindle Options:

HSD 11HP Spindle

• 5 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 9 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 5 HP HSD 915, continuous duty,push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM.  Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• 11 HP HSD 919, continuous duty, push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM.  Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• All spindle options are electric fan cooled for quiet operation.

Table Options:

• 4′ x 4′ Phenolic table top machined flat.
• 4′ x 4′ Phenolic table top machined flat with 3/8″ steel helicoil inserts on 12″ centers.
• 4′ x 4′ aluminum T-slot table.
• 4′ x 4′, 2-Zone, phenolic vacuum plenum with manual controls.

Optional Accessories:

• 6-Position tool rack for fully automatic tool change capabilities.
• Automatic tool height sensor. Uses the 6th position on the tool rack. The fully automatic tool change machine becomes 5-position.
• Dust hood for point-of-generation chip collection. 4” port requires a 1,200 cfm dust collector hook-up. Dust collector not included.
• Hand-held teach pendant on umbilical cord with axis select and jog hand-wheel.
• Ethernet card with standard TCP/IP protocol for easy connection to your network.
• M04 counter clockwise spindle rotation for use with left handed tools and to overcome blow-out problems when machining hard-woods.
• Unist “Uni-Max” coolant system with M-code programmable on/off control, and single or multiple nozzles for cutting non-ferrous metals requiring lubrication. Dust hood must be removed while using this system.
• 1” bridge spacers installed to increase bridge clearance to 9”.
• 2” bridge spacers installed to increase bridge clearance to 10”.
• 3” bridge spacers installed to increase bridge clearance to 11”.

Vacuum Pumps:

• Travaini EVO-5, 5 HP, 70 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 20 amps required. Great for sealed fixture applications.
• Travaini EVO-10, 10 HP, 145 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 30 amps required. Great for sealed fixture and porous-plenum applications.

Contact CNC Parts Dept at 858.922.4967 for more information on The Patriot.

“Thanks for the great response time. The machine was up and running Friday. ”

-Paul Matthews
http://www.steelcase.com/

CNC Parts Dept.’s monthly newsletters include, and is not limited to, information regarding CNC routers, CNC Troubleshooting, and CNC maintenance tips. We do not share your personal information with 3rd parties, and you are welcome to opt out at any time, no questions asked. Thank you for your interest!

~CNC Parts Dept, Inc
parts@cncpd.com
858.922.4967